Padmount Fuse Cabinet Solutions
Scott Engineering, Inc. offers a wide range of free-standing, self-supporting dead-front fuse cabinets. These low-profile single and three phase cabinets are designed as fused sectionalizers. They can be used where underground cable must be sectionalized and protected. Designs can be offered for 15kV or 25kV voltage classes.
STANDARD FEATURES
- 12 Ga. cold-rolled steel construction throughout
- Meets ANSI and Western Underground tamper resistance standards
- All door-to-cabinet seams are of double baffle design for extra security
- MIG Welded throughout
- Three inch (3”) structural channel base that is hot-dip galvanized after fabricated
- Roof is cross-kinked for both strength and drainage
- Stainless Steel Door Hinges
- Bold, clear Cautionary Labels
- Circuit Diagram on inside of doors
- Positive Door Stop Locks for open position
- 3 mil thick (min) of Polyamide-cured Epoxy primer
- 3 mil thick (min) of finish coat of aliphatic polyurethane
- Fuse compartment isolated by NEMA Grade GPO-3 Barriers with individual phase barriers and hot-stick removable fuse access barriers
- 200A Bushing Wells
- Adjustable Fuse Mountings allow field change of fuse mounting code
- Doors provided with Padlockable Handle with vandal resistant three-point latching
- Cabinet doors have lift off capabilities when in open position
- Removable Lifting Eyes
OPTIONAL FEATURES
- Load-break Bushing well inserts
- Finish Color
- Coastal Finishing System with Inorganic Zinc Primer
- Clip-mounted NX or equal Fusing
- S&C SM-20TM Live Parts, End Fittings and SMU-20TM Fusing
